• NDT Facilities
• Mechanical testing Facilities
• Heat Treatment
• Pressure Testing

1. NDT FACILITIES

RT: RADIOGRAPHIC TESTING (SUB VENDOR)

• Radiography Capacity of up to 150mm thickness
• X-Ray Capacity- up to 36 mm
• Gamma Ray Capacity: Up to 150 mm
• Processing Dark Room – In House and Sub Vendor)

UT: ULTRASONIC TESTING (SUB VENDOR)

• UT facility for Scanning of Plates, Butt Welds & Fillet Welds

MPT: MAGNETIC PARTICLE TESTING METHODS (SUB VENDOR)

• Dry Visible Power method
• Wet Fluorescent Method
• Testing Machine
• Portable York, Probes & Permanent Magnets

LPT: LIQUID PENETRATION TESTING METHODS (IN HOUSE)

• Visible Solvent Removal Methods
• Fluorescent Solvent Removable Method

HELIUM LEAK TEST & VACUUM CREATING- IN HOUSE

•  1. Sniffer Method
• 2. Vacuum Method

2. MECHANICAL AND CHEMICAL TESTING (SUB VENDOR – MET HEAT ENGG.)

• Tensile
• Bend
• Micro Structure, IGC
• Macro
• Hardness
• Spectro Analysis

3. HEAT TREATMENT

FACILITIES FOR HEAT TREATMENT

• Closed Furnace: Heating By Electrical, Oil Fired & Gas Fired
• Internal Fire Type: Heating by Diesel Fired
• Local Area: Heating by Electric Coil

TYPE OF HEAT TREATMENT CARRIED OUT

• Stress Relieving Heat Treatment
• Normalizing
• Post Weld Heat Treatment
• Solution Annealing Heat Treatment
• Tempering Heat Treatment

The above Heat treatment can be carried out for Individual Components & Complete equipment as per the requirement.

4. PRESSURE TESTING

• Hydraulic( 250 Kg / Cm2g)
• Pneumatic( 70 Kg/ Cm2g)

5. DIMENSIONAL CHECK (IN HOUSE)

• Scales up to 12’’
• Scales up to 36’’
• Tape – 3/5/15/20 meters
• Micrometers, Vernier Caliper
• UT thickness Meter

6. FINAL PAINT DFT CHECK – 10 TO 600 MICRONS - IN HOUSE

7. PERFORMANCE TEST FOR EJECTOR (IN HOUSE)

• Water Jet Ejector: 200GPM water available at 11 Kg/cm2g
• Air Jet Ejector: 12.5HP compressor with 125Psig pressure
• Steam Jet Ejector : Up to 10 Kg/cm2 – 1 ton / hr